607 Wood Shop
Finger Lakes Board
Finger Lakes Board
**THESE BOARDS ARE MADE ONLY BY CUSTOM ORDER!
Due to the time required to create them, and the desire of a specific placement of the heart, we do not create these boards without an order, and a deposit. Please send us a message, and we would be happy to begin that process with you! **
Custom serving board handcrafted from Domestic Walnut. This serving board features a silhouette of the Finger lakes. We recommend that this board be used as a serving tray. While you can cut on it, we do not recommend prolonged cutting, which could damage the beautiful grain.
All of our cutting boards are sealed with 607 Shop Butter. This beeswax and mineral oil mix will help protect your cutting board for years to come. A vegan option is available upon request. Please be aware that this could impact shipping times. If you require a vegan finish, please send us an email with your order number, and we will make the adjustment at no additional cost.
This board features some of our beautiful domestic Walnut hardwood. The finger lakes are then carved and filled with a blue resin. This is a custom board which is made to order and may take 3-5 business days to complete.
Please note that the finger lakes board will not have the heart on it, however, it can be added upon request.
Dimensions: 12" W x 16" L x 1.25" H
Every board is unique and because of this the dimensions and wood grain may vary slightly.
Handcrafted in the USA!
All of our products are made of the finest quality wood, and materials that are available, and we know how happy you'll be with your 607 Wood Shop purchase. With the proper care, your purchase can last for generations, but over time, it'll need a little help from you. Here's what we recommend.
Hand Wash Only
To avoid bacteria, it's important that you wash your cutting board immediately after use. Never submerge your cutting board in water. Use hot soapy water and wipe the cutting board down, rinse with hot water only and wipe dry with a clean dish towel. Always store your cutting board in a dry area. DO NOT place your cutting board in the dishwasher.
Disinfect and Deodorize
We recommend filling a spray bottle with white vinegar to disinfect and deodorize your cutting boards. Simply spray the cutting board and let it sit for a few minutes. Wipe it down with a damp warm cloth.
Combine 2 tablespoons of baking soda, 1 tablespoon of salt and 3 tablespoons of hot water and mix. when a paste forms simply spread it over your cutting board and scrub the entire surface. Wipe the cutting board clean with a warm wet cloth and then with a clean dry dish towel. Bear in mind that too much salt can scratch the cutting board, so don't go overboard with this step.
Cutting Board Finish
Every few months, your cutting board will need a coat of oil or wax that will help it seal out moisture, prevent bacteria, enhance the colors of the board, and prevent the decay of the wood. While there are many products out there which you can use, we suggest keeping it simple. Why spend gobs and gobs of money when you don't have to? A generous application of food grade mineral oil will do the job, but we suggest you use our personal blend. Our 607 Shop Butter is an aromatic mixture of mineral oil, and beeswax, blended in a easily spreadable paste, which we have found is PERFECT for this purpose. And at a fraction of the cost of the brand name butcher block conditioners, we think you'll find our Shop Butter to be all that you need.
When your board starts to show its age, and the knife marks are becoming too visible, your board will need to be sanded again. This is not difficult, and with average use, only needs to be done every few years. We recommend the use of a "palm sander" or a "random orbital sander", however, not everyone owns these, and you absolutely can do it by hand. You might just be more tired afterwards. We suggest using at least 3 different sandpaper grits to bring back your board's sheen and velvet finish. You'll want to start with 150 grit sandpaper, and sand the whole board. You should hand sand the edges, and corners, and make sure you're providing equal pressure as you move across the board. When you have completed this step, you'll then move up to 220 grit sandpaper, and repeat the process. You could stop here, but don't you want the board to look like it did when it was brand new?! If you do, you'll want to wet a rag with water, and rub it all over the board. The idea is to coat the whole board in water, and raise up that freshly sanded grain. The board doesn't need to be swimming, but make sure you wet the whole thing. When it dries, you'll repeat your sanding steps with 320 grit sandpaper. This will give you a super smooth finish on the boards, and ensure that it'll keep it's smooth finish the next time you wash the board. Now go cover it in a few coats of our 607 Shop Butter, and you'll be on your way again.